Ricardo VM-II 3-5KW
new Ricardo VM-II 3-5KW
Features:
- Voltage:230VAC;
- Solar Charger Type: MPPT;
- Frequency Range: 50 Hz/60 Hz;
- Transfer Time: 10/20 ms;
- Waveform: Pure Sine wave;
- Maximum PV Array Power: 4000W;
- Short circuit protection;
- Reserve polarity protection
- Dimension: 100 x 300 x 440mm;
- Operating Temperature: -10°C to 50°C.
Where to buy Compare
|
|
Technology
|
UPS type |
Off-Line |
|
Form factor |
Tower |
Input parameters
|
Power |
480 VA |
|
Current frequency |
(50/60)±1Hz (Frequency self-adapt system) |
Output parameters
|
Output voltage |
220 / 230V ± 10% |
|
Form voltage |
Stepped approximation to a sinewave |
|
Current frequency |
50/60 Hz ± 1% |
|
Switching time |
2-4 ms, including the determination of the time |
|
Automatic voltage regulation (AVR) |
1 step down, two steps up |
Protection and UPS equipment
|
Surge Protection |
Yes |
|
Overloads protectio |
110% < Load percentage <120%, buzze beeps; load percentage >120%. output shuts off, buzzer beeps continuosly |
|
Protection for UPS input |
Fuse for overload protection and short circuit protection |
|
UPS protection for short circuit |
Immediate shutdown of the UPS using the input fuse |
|
Protect the phone, fax, modem, LAN |
No |
Ports and interfaces
|
USB-port |
No |
|
SNMP-card |
No |
Battery
|
A type |
Lead acid, sealed, maintenance-free |
|
Voltage and battery capacity |
12V / 4,5AH x 1 |
|
Typical recharge time |
8 hours (up to full capacity of the battery) |
|
Estimated battery backup time (at 50% load) |
- |
|
Estimated battery backup time (at 100% load) |
- |
|
Connecting additional battery |
No |
|
Cold start |
Yes |
|
Battery protection |
Automatic verification of the battery and when the protection of the critical category |
Physical parameters
|
Output connectors |
1 x Euro (Schuko) + 1 x IEC (Bypass) |
|
UPS Dimensions (W * D * B) mm |
280*101*142 mm |
|
Weight, kg |
3.4 kg |
|
Indication |
LED (green LED - supply from the mains power, yellow LED - work redime of battery, red LED - overload or fault) |
|
Sound alarm |
Standby mode - a rare acoustic signal (1 every 5 seconds, then repeat every 60 seconds);†low battery level - sound beeps (last 16 seconds);†overload - a very special sound signal (every 2 seconds); |
Case features
|
Material |
Plastic |
Electrical connection to the front
|
Power cable |
Cord 1.2m |
Guarantee
|
Standard warranty |
1 year |
All sections
IT Peripherals
Power Product

Austria
Croatia
England
Kazakhstan
Spain
Czech Republic
France
Poland
Turkish
Bulgaria
Germany
Germany
Italy
Ukraine
Ukraine
Russia
Belarus
USA
Canada
Kuwait
Lebanon
Saudi Arabia
ОАЕ
Algeria
Kenya
Nigeria
South Africa
China
Pakistan
Australia
China
India 

















Data cables
Charging device
Battery
Solar Panel
Uninterruptible Power Supply
Inverters