CMUOA-650 Solar-M-3K

This series UPS is designed to protect a variety of equipment that works as part of a solar panel inverter.†UPS can operate with two types of PWM and MPPT inverters, allowing them to be univarsalnymi in this class.

Features:

LCD-display
Microprocessor control
Case type (RACK) for installation in the rack cabinet
Support for operation with solar inverters 2 types: PWM and MPPT
Support UPS operating mode of the DSU
Pure sine output
Various line-up of outlets
UPS On-line class
PF - 0.8
On Self Test
Cold start
Microprocessor control
Wide input voltage range
Adjustable battery charge current
Signal programming function for dry contacts (AS-400)
Protection against short-circuit, overload and other interference in the input power
Charge the battery when the UPS is off
Connecting additional battery kakbinetov
The presence of EPO plugs for quick emergency power off
Availability management ports: USB, RS-232, SNMP, RJ-11/45

Where to buy Compare

Warranty 12 months

Where to buy

Service centers

Delivery

Acquire

To purchase this product and delivery methods
contact your sales specialist.
Rely on professionals!

Sales department

Presentations

Check out the range of our products in the presentation section.
If you have any questions, please contact a sales specialist.
View presentation

Technology

UPS Type

On-line

execution

Form Factor

Installation in 19 '' rack (Rack)

Number of phases

Specification

1 phase input to ground with ground and 1-phase output from the ground

Input parameters

Power	3000VA / 2400W
Input voltage	220/230/240
Input voltage range	110 - 300
Current frequency	40 -70 Hz (auto sensing)
Phases	one phase grounding

Output parameters

Output voltage	220/230/240 V ± 1%
Form voltage	pure sine wave
Current frequency	50/60 Hz ± 0,3%
Automatic voltage regulation (AVR)	Yes
switching time	0 ms
Power factor correction	0,8
Harmonic voltage fluctuations	<3% (linear load) and <5% (with a non-linear load)
Crest factor	3:1

Protection and UPS equipment

Surge Protection	Yes
Overload protection	Yes
UPS Login	Circuit breaker
Short circuit	Immediate load shedding or tripping of upstream circuit breaker
Protect the phone, fax, modem, LAN	No

Ports and interfaces

Dry contacts	No
USB-port	Determination of low battery, control schedule power on / off the UPS, monitoring of input and output voltages
RS-232	Determination of low battery, control schedule power on / off the UPS, monitoring of input and output voltages
RS-485	Optionally
Port emergency shutdown EPO	Yes
SNMP	No
Connections of the generator input	Yes
Parallel UPS connection	No
Voltage and battery capacity	-
Typical recharge time	4 hours (up to 90% of full battery capacity)
Charging Current (Max)	10A
Estimated battery backup time (at 50% load)	-
Estimated battery backup time (at 100% load)	-
Hot-swappable batteries	No
Connecting additional battery cabinets	No
Cold start	Yes
battery protection	Automatic diagnostics, protection against overcharge and short-circuit

Characteristics of solar inverter

A type	MPPT
Maximum input power	3.0 kW
Charging Current (Max)	60.0 A
UPS inverter + BAT total charging current (Max)	70.0 A
Input Voltage (DC)	145

Physical parameters

Output connectors	3 x IEC-320 C13 with redundant power and filtration
Dimensions (W * D * B) mm	380x440x88 2U
Weight, kg	10
Indication	LED and LCD-display (input / output voltage, frequency input / output voltage Operating modes: normal, bypass, battery power, battery level, load level)
Sound alarm	Beep in battery mode, when the battery is low, overload and fault charger

Case features

Material

Metal (0.5 mm)

Environmental Parameters

Acoustic noise	<50 dB (at 1 meter from surface)
Working conditions	Humidity 0 ~ 95% non-condensing, temperature -5 ~ 45? C

Guarantee

standard warranty

1 year

Features:

Acquire

Presentations

All sections