CMUO-900-2.5KL

The new generation of line-interactive UPS from 800 VA to 3000 VA are designed to protect servers and other equipment critical to the shape of the supply voltage of the main problems with power supply: high-voltage pulses, electromagnetic and radio frequency interference, slides, promotions and extinction voltage sources.†The ability to use SNMP-card make this class attractive for the protection of responsible computing and telecommunications equipment.

Features:

LCD-display
Pure sine output when running on battery
On Self Test
Cold start
Case type universal (TOWER & RACK)
PF - 0.9
Line Interactive UPS Class
Stabilization of high and low input voltage
Operating support for hot swap battery function
Programmable output sockets
Various line-up of outlets
The presence of EPO plugs for quick emergency power off
Availability management ports: USB, RS-232, SNMP, RJ-11/45
Protection against short-circuit, overload and other interference in the input power
Adjustable battery charge current
Charge the battery when the UPS is off

Where to buy Compare

Warranty 12 months

Where to buy

Service centers

Delivery

Acquire

To purchase this product and delivery methods
contact your sales specialist.
Rely on professionals!

Sales department

Presentations

Check out the range of our products in the presentation section.
If you have any questions, please contact a sales specialist.
View presentation

Technology

UPS Type

Line Interactive

Execution

Form Factor

Universal (installation in 19 '' rack or on the floor) (Tower & Rack)

Number of phases

Specification

1 phase input to ground with ground and 1-phase output from the ground

Input parameters

Power	2500 VA / 2250 W
Input voltage	208/220/230 / 240V
Input voltage range	162 - 290 V
Current frequency	50/60 Hz ± 10% (auto sensing)

Output parameters

Output voltage	220/230 / 240V ± 3%
Form voltage	Pure Sine Wave
Current frequency	50/60 Hz ± 0.5%
Switching time	2 ~ 6 ms, including the determination of the time
Harmonic voltage fluctuations	<2% (linear load) and <5% (with a non-linear load)
Crest factor	3:1

Protection and UPS equipment

Surge Protection	Yes
UPS protection against overloads	Yes
Protection for UPS input	Circuit breaker
UPS protection for short circuit	Immediate shutdown of the UPS, or protection by means of the input circuit breaker
Protect the phone, fax, modem, LAN	1 x Rl11 / RJ45

Ports and interfaces

USB-port	Indication of low battery power, the voltage at the input / output load power management on / off UPS
RS-232	Indication of low battery power, the voltage at the input / output load power management on / off UPS
Port emergency shutdown EPO	UPS shutdown opening EPO connector pins
SNMP-card	Optionally

Accumulator battery

A type	Lead acid, sealed, maintenance-free
Voltage and battery capacity	12V / 7AH x 6

Battery

Typical recharge time	4 hours (up to 90% of full battery capacity)
Estimated battery backup time (at 50% load)	-
Estimated battery backup time (at 100% load)	-
Hot-swappable batteries	Yes
Connecting additional battery cabinets	Yes
Cold start	Yes
Battery protection	Automatic verification and protection of critical discharge on LCD-display Battery replacement indicator

Physical parameters

Output connectors	8 x IEC-320 C13 with redundant power and filtering (including 4 pcs. Programmable) + 1 x IEC320 C19 with redundant power or 3 x EURO with redundant power and filtering (including 1 pcs. Programmable)
Dimensions (W * D * B) mm	438x630x88 (2U)
Weight, kg	30,7
Indication	LED and LCD-display
Sound alarm	Standby mode - a rare acoustic signal (1 every 10 seconds);†Low Battery - a frequent beep (every second);†overload - a very special sound signal (every 0.5 seconds);†fault - continuous beep

Case features

Material

Metal (0.5 mm)

Environmental Parameters

Acoustic noise	<45 dB (1 meter from the surface)
Working conditions	Humidity 0% to 90% non-condensing, temperature: 0 ~ 40 ?C

Guarantee

Standard warranty

1 year

Features:

Acquire

Presentations

All sections