In compare 0 items

CMUS-610

The new generation of line-interactive UPS from 1000 VA to 3000 VA are designed to protect servers and other equipment critical to the shape of the supply voltage of the main problems with power supply: high-voltage pulses, electromagnetic and radio frequency interference, slides, promotions and extinction voltage sources.†The ability to use SNMP-card make this class attractive for the protection of responsible computing and telecommunications equipment.

Features:

  • LCD-display
  • Pure sine output when running on battery
  • Case type (TOWER)
  • PF - 0.9
  • Line Interactive UPS Class
  • On Self Test
  • Cold start
  • Auto power when the input voltage voostanovlenii network
  • Charge the battery when the UPS is off
  • Protection against short-circuit, overload and other interference in the input power
  • Stabilization of high and low input voltage
  • Adaptatiya to the current frequency
  • Adjustable battery charge current
  • ECO mode (turn off the UPS with no load)
  • Various line-up of outlets
  • Availability management ports: USB, RS-232, SNMP, RJ-11/45
  • The presence of EPO plugs for quick emergency power off



Where to buy Compare


Acquire

To purchase this product and delivery methods
contact your sales specialist.
Rely on professionals!


Sales department


Presentations

Check out the range of our products in the presentation section.
If you have any questions, please contact a sales specialist.

View presentation

Technology

UPS Type

Line Interactive

Execution

Form Factor

Tower

Number of phases

Specification

1 phase input to ground with ground and 1-phase output from the ground

Input parameters

Power

1000VA / 800W

Input voltage

208/220/230 / 240V

Input voltage range

165 - 300

Current frequency

50/60 Hz ± 10% (auto sensing)

Output parameters

Output voltage

220/230 / 240V ± 5%

Form voltage

Pure Sine Wave

Current frequency

50/60 Hz ± 0.3%

Switching time

less than 10 ms, including the determination of the time

Harmonic current oscillations

<5% (linear load)

Crest factor

3:1

Protection and UPS equipment

Surge Protection

Yes

UPS protection against overloads

Yes

Protection for UPS input

Circuit breaker

UPS protection for short circuit

Immediate shutdown of the UPS, or protection by means of the input circuit breaker

Protect the phone, fax, modem, LAN

2 x RJ45

Ports and interfaces

USB-port

Indication of low battery power, the voltage at the input / output load power management on / off UPS

SNMP-card

Optionally

Battery

A type

Lead acid, sealed, maintenance-free

Voltage and battery capacity

12V / 7AH x 2

Typical recharge time

4 hours (up to 90% of full battery capacity)

Estimated battery backup time (at 50% load)

-

Estimated battery backup time (at 100% load)

-

Connecting additional battery

Yes

Cold start

Yes

Battery protection

Automatic verification and protection of critical discharge on LCD-display Battery replacement indicator

Physical parameters

Output connectors

6 x IEC-320 C13 with redundant power and filtration, or 2 x EURO with redundant power and filtration

UPS Dimensions (W * D * B) mm

144x347x215

Packing dimensions (W * D * B) mm

236x427x316

Weight, kg

12,2

Gross Weight

13,2

Indication

LED and LCD-display

Sound alarm

Standby mode - a rare acoustic signal (1 every 5 seconds, then repeat every 60 seconds);†low battery level - sound beeps (last 16 seconds);†overload - a very special sound signal (every 2 seconds);

Case features

Material

Metal (0.5 mm)

Environmental Parameters

Acoustic noise

<50 dB (1 meter from the surface)

Working conditions

Humidity 0% to 90% non-condensing, temperature: 0 ~ 40 ?C

Guarantee

Standard warranty

1 year

All sections